In high-density PCBs, the flatness of hot air leveling will affect subsequent assembly; therefore, HDI boards generally do not use hot air leveling processes. With the advancement of technology, hot air leveling processes suitable for assembling QFPs and BGAs with smaller pitches have emerged in the industry, but there are fewer practical applications. At present, some factories use organic coating and electroless nickel/immersion gold processes instead of hot air leveling processes; technological developments have also led some factories to adopt tin and silver immersion processes. Coupled with the lead-free trend in recent years, the use of hot air leveling has been further restricted. Although the so-called lead-free hot air leveling has appeared, this may involve equipment compatibility issues.
2. Organic coating It is estimated that about 25%-30% of PCBs currently use organic coating technology, and this proportion has been rising. The organic coating process can be used on low-tech PCBs as well as high-tech PCBs, such as PCBs for single-sided TVs and boards for high-density chip packaging. For BGA, there are also more applications of organic coating. If PCB does not have functional requirements for surface connection or a limitation of storage period, organic coating will be the most ideal surface treatment process.
3. The process of electroless nickel/immersion gold electroless nickel/immersion gold is different from organic coating. It is mainly used on boards with functional requirements for connection and a long storage period. Due to the flatness problem of hot air leveling and For the removal of organic coating flux, electroless nickel/immersion gold was widely used in the 1990s; later, due to the appearance of black disks and brittle nickel-phosphorus alloys, the application of electroless nickel/immersion gold processes decreased. .
Considering that the solder joints will become brittle when removing the copper-tin intermetallic compound, there will be many problems in the relatively brittle nickel-tin intermetallic compound. Therefore, almost all portable electronic products use organic coating, immersion silver or immersion tin formed copper-tin intermetallic compound solder joints, and use electroless nickel/immersion gold to form the key area, contact area and EMI shielding area. It is estimated that about 10%-20% of PCBs currently use electroless nickel/immersion gold processes.
4. Immersion silver for circuit board proofing is cheaper than electroless nickel/immersion gold. If the PCB has connection functional requirements and needs to reduce costs, immersion silver is a good choice; coupled with the good flatness and contact of immersion silver, Then we should choose the immersion silver process.
Because immersion silver has good electrical properties that other surface treatments cannot match, it can also be used in high-frequency signals. EMS recommends the immersion silver process because it is easy to assemble and has better checkability. However, due to defects such as tarnishing and solder joint voids, the growth of immersion silver is slow. It is estimated that about 10%-15% of PCBs currently use the immersion silver process.
5. Immersion tin tin was introduced into the surface treatment process in the past ten years. The emergence of this process is the result of the requirements of production automation. Immersion tin does not bring any new elements into the solder joints, which is especially suitable for backplanes for communications. Tin will lose its solderability beyond the storage period of the board, so immersion tin requires better storage conditions. In addition, the immersion tin process has been restricted in its use due to the carcinogenic substances contained in it.
