This is a board to board structure RK3588 development board. , easy to use and develop. With open source and Free SDK , the board is easily used.
Rockchip RK3588 is used as the main chip, with 8nm advanced process technology, the main frequency can reach up to 2.4GHz, integrated quad-core 64-bit Cortex-A76 and quad-core 64-bit Cortex-A55, a total of eight-core processors and ARM Mali-G610 MC4 GPU, supporting 8K video encoding and decoding and 8K display output, super image processing capabilities, support for multiple camera input, and support for multiple screens.
8 Built-in independent NPU computing power can reach 6TOPS, enabling various AI scenarios.
Provide a variety of memory and storage combinations to choose from, balanced onboard hardware configuration, and a wide range of applications.
High integration, with rich expansion interfaces, with dual Gigabit network ports, USB, M.2, PCle3.0X4, 5MiniPCle, HDMI, MIPI screen interface and MIPI camera interface, audio interface, infrared reception, TF card holder and other peripherals, can give full play to the performance of the processor and further expand the use of the board.
Officially supports mainstream Andriod 13, Debain, Ubuntu operating system images, and can be applied to a variety of different application environments.
Completely open source, providing official tutorials, complete SDK driver development kits, design schematics and other resources, you can easily get started without blind spots.
Ready to use, supports multiple operating systems
Built-in independent NPU, computing power can reach 6TOPS
Adopts three-core architecture, supports int4/int8/int16/FP16/BF16/TF32, empowers various AI scenarios
Easily encode and decode 8K video
Supports up to 8K@60 frames H.265/H.264/AV1/VP9/AVS2 video decoding and 8K@30 frames H.264/H.265 video encoding
Multi-screen display, high-definition portability
Supports multi-screen display, supports up to 8K@60 frames + 4K@60 frames + 2K@60 frames (three-screen display) or 4K@60 frames + 4K@60 frames + 4K@60 frames + 2K@60 frames (four-screen display)
48MPISP, super image processing capability
Onboard 6-way MIPICSI camera interface,
Supports 6-way camera input (4*2lanes+2*4Lanes), meeting the needs of various devices
RK3588 Core board parameters
Connector: Male connector: DF40C-100DP-0.4V(51) Female connector: DF40C-100DS-0.4V(51)
Main chip: RK3588 (quad-core A76 + quad-core A55, Mali-G610, 6TOPS computing power) BTB leads to 400 pins, 0.5mm spacing, leads to all I0
Memory: 4/8/16GB, LPDDR4/4x
Storage: 32/64/128GB.eMMC
Connector: Male: DF40C-100DP-0.4V(51) Female: DF40C-100DS-0.4V(51)
Power interface: 12V@2A DC input, DC interface*1; power output interface*1
Ethernet: Gigabit network port*2, support 10/100/1000Mbps data transmission rate
HDMI: HDMI12.0 input*1, up to 3840x2160@60FPS; HDMI2.1 output*2, supports multiple screens with other screens, maximum resolution 7680x4320@60Hz (8K resolution)
MIPI-DSI: MIPI screen interface*2 (front*1, back*1), can be plugged into Wildfire MIPI screen, supports multiple screens with other screens; single MIPI mode maximum resolution 1920*1080@60HZ
MIPI-CSI: MIPI camera interface*6 (front*3, back*3), can be plugged into Wildfire MIPI camera
USB2.0: USB-HOSTType-A interface*3
USB3.0: USB-OTGType-A interface*1; Type-C interface*1, can be used for firmware burning, supports DP1.4 protocol
PCle interface: Mini-PCle interface*1, can be used with full-height or half-height WIFI network card, 4G module or other Mini-PCle interface module: PCle3.0X4 interface*1
M.2 interface: M.2EKEY interface*1, supports M.2 E-Key wireless network card module; M.2 M KEY interface*1, supports M.2 M-Key PCle3.0*4Lanes specification 2280 hard disk
TF card holder: Micro SD (TF) card holder*1, supports TF card boot system, up to 512GB
SIM card holder: SIM card holder*1, SIM card function needs to be used with 4G module
SATA interface: Standard SATA interface*1; SATA power interface*1, supports 12V output
CAN: CAN*2
ADC: ADC acquisition interface*1
Debug serial port:
Debug serial port*1 (UART2), default parameter 1500000-8-N-1; UART serial port*2 (UART7&UART9); RS232*2 (UART4&UART7);
RS485*2 (UART4&UART7); RS232/RS485 selection jumper interface*2
Audio: Onboard MIC microphone*1; SPK speaker interface*2, can connect 3W power speaker headphone output + microphone input 2-in-1 interface*1
Button: ON/OFF button*1; MaskRom button*1; Recovery button*1; Reset button*
LED: Power indicator*1; System indicator*1
Infrared receiver: Support infrared remote control function
RTC: RTC power socket*1
Fan interface: Support installation of 5V or 12V fan cooling
