This is a board to board structure RK3588 development, easy to use and develop. The matching core board can be used directly with this motherboard. Support customization, support industrial grade core board and motherboard batch.
8nm advanced process, 8-core 64-bit architecture, high performance, low power consumption
ARM Mali-G610 MC4 GPU, dedicated 2D graphics acceleration module
6TOPs NPU, enabling various AI scenarios
8K video encoding and decoding, 8K display output
Built-in multiple display interfaces, support multi-screen display
Super image processing capabilities, 48MP ISP, support for multiple camera inputs
Rich high-speed interfaces (PCIe, TYPE-C, SATA, Gigabit Ethernet), easy to expand
Android and Linux OS
RK3588 Core board parameters
Connector: Male connector: DF40C-100DP-0.4V(51) Female connector: DF40C-100DS-0.4V(51)
Main chip: RK3588 (quad-core A76 + quad-core A55, Mali-G610, 6TOPS computing power) BTB leads to 400 pins, 0.5mm spacing, leads to all I0
Memory: 4/8/16GB, LPDDR4/4x
Storage: 32/64/128GB.eMMC
Connector: Male: DF40C-100DP-0.4V(51) Female: DF40C-100DS-0.4V(51)
Power interface: 12V@2A DC input, DC interface*1; power output interface*1
Ethernet: Gigabit network port*2, support 10/100/1000Mbps data transmission rate
HDMI: HDMI12.0 input*1, up to 3840x2160@60FPS; HDMI2.1 output*2, supports multiple screens with other screens, maximum resolution 7680x4320@60Hz (8K resolution)
MIPI-DSI: MIPI screen interface*2 (front*1, back*1), can be plugged into Wildfire MIPI screen, supports multiple screens with other screens; single MIPI mode maximum resolution 1920*1080@60HZ
MIPI-CSI: MIPI camera interface*6 (front*3, back*3), can be plugged into Wildfire MIPI camera
USB2.0: USB-HOSTType-A interface*3
USB3.0: USB-OTGType-A interface*1; Type-C interface*1, can be used for firmware burning, supports DP1.4 protocol
PCle interface: Mini-PCle interface*1, can be used with full-height or half-height WIFI network card, 4G module or other Mini-PCle interface module: PCle3.0X4 interface*1
M.2 interface: M.2EKEY interface*1, supports M.2 E-Key wireless network card module; M.2 M KEY interface*1, supports M.2 M-Key PCle3.0*4Lanes specification 2280 hard disk
TF card holder: Micro SD (TF) card holder*1, supports TF card boot system, up to 512GB
SIM card holder: SIM card holder*1, SIM card function needs to be used with 4G module
SATA interface: Standard SATA interface*1; SATA power interface*1, supports 12V output
CAN: CAN*2
ADC: ADC acquisition interface*1
Debug serial port:
Debug serial port*1 (UART2), default parameter 1500000-8-N-1; UART serial port*2 (UART7&UART9); RS232*2 (UART4&UART7);
RS485*2 (UART4&UART7); RS232/RS485 selection jumper interface*2
Audio: Onboard MIC microphone*1; SPK speaker interface*2, can connect 3W power speaker headphone output + microphone input 2-in-1 interface*1
Button: ON/OFF button*1; MaskRom button*1; Recovery button*1; Reset button*
LED: Power indicator*1; System indicator*1
Infrared receiver: Support infrared remote control function
RTC: RTC power socket*1
Fan interface: Support installation of 5V or 12V fan cooling
